free delivery
Free 1st class
delivery to most UK
destinations.
Next day delivery
option available.
|
|
| Excellent quality product, very rapid delivery - it arrived early next day! Thanks for a very good service. |
| more... |
|
|
|
Garador C-Type Spring Cable
Copyright Notice Please note that, unless stated otherwise, the copyright to all material presented on this website is the property of Kenilworth Spares. We rigorously protect our rights under UK Copyright Law and will actively pursue any infringements. |
|
|
- Open the door approximately 6" and place a block under it to keep it open.
- Remove the e-clip (arrow 1) and slide the roller spindle towards the centre of the door (arrow 2).
- Thread the large loop of cable over the plastic roller (arrow 3).
- Slide the roller spindle back to its original position (arrow 4).
- Refit the e-clip (arrow 5).
- Ensure the cable is located in the grooved slot of the roller spindle (arrow 6).
- Thread the opposite end of the cable throught the spring assembly as shown in Fig 2. Then locate the spring back in the plastic guide channel.
- holding the mid loop of the cable, slide the spring up the guide channel until you can attach the mid loop to the S hook at the top of the track.
- Fit the cable arounf the pulley wheel on the top corner bracket (refer to the opposite side of the door for location of cable).
- Prop the door in the open position and refit the spring.
|
 |
| Please Note: All work is undertaken at your own risk and safety glasses and gloves should be worn at all times. |
|
|
|